|
Samsung Hitachi Benq Liteon
Disc Error Problems Drive jamming
Disc Tray Wont Open
Not Reading Game Discs |
Xbox360 System Update Issues
Done a Xbox360 System Update
Game discs wont read anymore
Stuck in an endless update loop
Wont System update - Drive wont open
|
Game Disc read Error
Game disc not reading or play DVD error message is usually caused by a faulty Laser, Spindle, or even a sled Motor inside the 360 DVD drive
|
Slim Red Dot Of Death Problem
This Xbox fault is due to BGA solder connections from the motherboard to the CPU/ GPU Usual repair involves BGA Re flow with our custom AGS Clamp Fix (No X-Clamp removal) |
Red Light Error Code Repair
E74 Error Message on screen with bottom right hand front Red light flashing is CPU, GPU or even the video scaler chip failure
or BGA Solder connections
360 Error Codes List
|
Xbox 360 CPU GPU Cooling Mod
Over-heating problems Fix involves cleaning removing any dried-out thermal paste, cleaning of cooling heat sinks, fan speed mod then a full cooling efficiency stress test |
360 Main Board Replacements
Xbox 360 Motherboard replacements are always in stock boards that have been destroyed by previous RROD Repairs with heat guns |
Power Supply Replacements
Replacement Power Supply Brick
All for Model Xbox Consoles including the new Xbox360 Black slim model Power Supply can cause 3 Red Lights Console Not turning, not powering up |
Disc Drive Laser Replacement
Live in a real dusty area ??
DVD Drive Laser Cleaner Service
With Laser Adjustment is usually done same day and will get your Console reading discs again cheap
|
DVD Drive Jamming
DVD drive wont Open Disc Jammed Scratching game discs is usually a Mechanical problem in the
DVD drive mechanism |
Disc Tray wont Open
Xbox 360 disc drive Repair Common open Tray error problems solved with Replacement drives for all Xbox360 Consoles including the new 360 Slim |
3 Red Lights Repair
Red Ring Of Death or RROD
Over heating Repair Service Cooling System cleaning or board repairs a Usual repair process for this problem |
Main board is removed CPU GPU are temperature controlled RE-FLOWED
Board is examined through a microscope
Heat sinks are modified X Clamps are not Removed Removal of X Clamps Usually is not a full proof repair,
Metal expands when hot, the purpose of the X Clamps is to allow for expansion contraction of the metal heat sinks & Motherboard removing X-Clamps usually results in the Motherboard cracking (Somethings gotta give, usually its not the Metal heatsink but the weaker fiberglass motherboard Cracks)
Cooling fan control circuits are altered to keep a constant Cooler running temperature
