This is a External interface board that connects your PS3 Blu ray drive to a PC via USB Allowing you to rip your PS3 game disc. This board only supports PS3 models that have the wide 30mm connector known at the PATA type interface.
You also need your 3Dump.bin file thats extracted from your PS3 console it will not work unless you have this binary file. Can Only be extracted if running Custom Firmware (CFW)

PS3 Compatible Drive for the 3k3y ripper board
This Drive is OK for the 3K3Y Ripper Board
From a CECHC02 Model Playstation console

This DVD Drive Is Not Compatible
The connector in this drive is 13mm wide and currently not compatible. this drive is used in the PS3 Model CECHL02
Is My PS3 Compatible With The 3K3y Ripper
First You need to check Your PS3 Model
Currently Needs to Be Phat Model Like the one below
Phat Model Compatible Next Check the model number on the back of the console

Slim PS3 is Currently Not Compatible

All PS3 slim Models use a thinner SATA connector and wont work with this Model Ripper board.

Phat Model PS3 Model Number Location is at the rear Near the Power Socket
Location of the Model number on a PS3 Phat console
Next check what version software you are running here....
If its Higher that 3.55 its needs to be downgraded back to CFW 3.55
Once downgraded Ddump.bin can be extracted for the ripper to operate correctly

More PS3 Model Information can be found here.....
Check what Software Version your running here....
If Your PS3 Software Version is Higher that 3.55 You need to downgrade more here...........
More Console Information here......